The Delta DT is designed for production of draw tape bags on roll with virgin, recycled, bio-based or biodegradable film. It is also possible to produce side-sealed, bottom sealed and star-sealed bags in a Delta DT line.

It is available for production in-line with an extruder or out-of-line, from an unwinder. The configuration includes a Delta sealing module and a Draw Tape module for insertion of the draw tape and sealing of the draw tape hem. You can choose to place the draw tape hem inside or outside the bag. With a special feature, it is also possible to switch between interior and exterior draw tape hem in the same lane.

The Draw Tape module can be equipped with automatic splicing of the draw tape. The longitudinal seal of the draw tape hem is made by the fill-safe sealing system, which offers very high-quality sealing and significantly reduced energy consumption. With this sealing system, the well-known notch effect on low-grade HD materials can practically be eliminated and the risk of tearing the top of the bag when lifting the filled bag is greatly reduced.

  

All bag types can be produced perforated or interleaved. It is possible to integrate automatic roll handling/packaging to your Delta line.

Performance
  • Max. speed 160 m/min (530 feet/min)
  • Max. cycles/min 490
  • Max. bag length 1100 mm (43.3 in)
  • Min. bag width 325 mm (12.8 in)
  • Max. bag width 10 m
  • Film thickness from 5 micron
End Products
Types of bags for this solution
Draw Tape
Draw Tape, interleaved
Technical data
Delta 940 DTDelta 1100 DTDelta max 940 DTDelta max 1100 DT
Min. film thickness5 microns5 microns5 microns5 microns
Max. speed160 m/min
530 ft/min
160 m/min
530 ft/min
160 m/min
530 ft/min
160 m/min
530 ft/min
Max. cycles300/min300/min490/min490/min
Min. bag width500 mm
19,7 in
500 mm
19,7 in
325 mm
12,8 in
325 mm
12,8 in
Max. bag width10.000 mm
393,7 in
10.000 mm
393,7 in
10.000 mm
393,7 in
10.000 mm
393,7 in
Max. bag length940 mm
37 in
1100 mm
43,3 in
940 mm
37 in
1100 mm
43,3 in
Max. roll change/min32 without tape
26 with tape
32 without tape
26 with tape
32 without tape
26 with tape
32 without tape
26 with tape
Number of lanes1111
Technical drawing
Recommendation

The following supplier recommends our equipment:

emosa_logo.JPG

Downloads

Product sheet

Download here




Find your contact

Delta DT Draw Tape bags

Delta DT.png

HEADQUARTERS               

Roll-o-Matic A/S

Damsbovej 12

DK-5492 Vissenbjerg

Denmark

+ 45 6611 1618

NORTH AMERICA

Roll-o-Matic Inc.

1300 Minters Chapel Road

Suite 100 Grapevine

TX 76051 - USA

1 (435) 237 7408 

LATIN AMERICA

Roll-o-Matic

Varsovia 36, Oficina 1208

Colonia Juárez, Cuauhtémoc

06600 Ciudad de México 

+52 56 1111 9911